918s on an F10
#1
Staging Lane
Thread Starter
Join Date: Oct 2004
Location: Dallas, Ga.
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
918s on an F10
i read the specs.. but just making sure before i order the cam.. i already have 918 springs with stock retainers.. can i toss in a F-10 on this set up? springs say their good to .600 lift. are stock push rods ok with this too?
(Cam specs off their site)
228"/228" .576"/.576" 114LSA - aggressive profile with a 2200-6600 RPM range, fair idle
(Cam specs off their site)
228"/228" .576"/.576" 114LSA - aggressive profile with a 2200-6600 RPM range, fair idle