SVC707

iTrader: (33)

well ive pulled the codes from my check engine light... ive had multiple misfire before since the hotcam install and one from the driver front oxygen sensor. but i got one for p0327 if i remember correctly... so i erased it and drove the car the other day and now again today 5 miles maybe. and now the light is on again. i havent pulled the code yet to see if its the same P0327 Knock Sensor 1 Circuit Low Input (Bank 1 or Single Sensor) but if it is what should i be looking for... i plan on replacing the heads already but if its "F"ed up really bad then i guess i have no choice but to get the 408 swap ive been wanting. but im hoping its not too bad just yet as i still dont have the budget to swap to the 408.... help please with some info

thanks Steve

cowboysfan

check plugs. what gap r they set at?




fuerzaws6

BAKED

iTrader: (14)

Probably just bent some valves.

NEVR2ND

iTrader: (10)

I would say just bent pushrods. Sounds like he still drives the car so the engine can't be that bad.

sstony

i agree with a bent pushrod. it happend to one of my buddies that did the same exact thing in his 99 SS

SVC707

iTrader: (33)

its got hardened or cm pushrods i forgot what cam with the crane rocker arms.. yeah it drive fine... but im about to pull the code again to see what it says

SVC707

iTrader: (33)

good news for me.. the only code coming up is 1133.. for the oxygen sensor!!!! nothing for the knock sensor... but im still using this as an excuse to order heads and im switching to the TSP MS3 ... we'll see if the heads got messed up along the way... car only has 36k on the odometer glad i dont have to get a new motor YET