D'scamaro

what kind of oil are yall running, and would a diff oil make my oil pressure lower than other oils?? im running 10w30 now.. just wondering what everyone else is running becuase im havening problems with low oil press.. thanks

mr2guru

iTrader: (16)

5w-40 amsoil after break-in. Pressure is up about 8-10psi from 10w-30 dino castrol.

obZidian

iTrader: (2)

well, from what i was told, a regular oil for the break in, lite in weight. (5w-30) than swap out for a synthetic o regular, heavier weight.

I got some significant ticking with the lite weight oil so i swapped out for a 10w-30..

dragonZ28

iTrader: (32)

I ran Mobil 1 10W-30 through the break-in period, and continue to run it. It is the best oil out there, IMO and I run it in all of my cars.

https://ls1tech.com/forums/dynamometer-results-comparisons/444396-sdpc-408-iron-block-results.html

My dyno results are nice - thank Mobil 1, lol.