What big cam for DD M6, frequent drag.
08-09-2006, 02:32 PM
#1
On The Tree
Thread Starter
What big cam for DD M6, frequent drag. I have an 01' Trans Am with the following mods:
Pacesetter headers
TSP ORY
Borla Adjustable Catback
Moser 9" w/ Tru-Trac, 4.11 gears
LS7 Clutch
SLP Lid
I am looking to do a large cam soon, I daily drive my car so it has to be streetable. I would love to have a nice lope at idle, I want 400rwhp+. I am not completely against doing heads at the same time. Is there a Cam or H/C setup that will land me 450rwhp with a stock bottom end N/A and still be able to be street driven? I go to the dragway about every other weekend, I don't always run but I do if I change something up on the car.
Pacesetter headers
TSP ORY
Borla Adjustable Catback
Moser 9" w/ Tru-Trac, 4.11 gears
LS7 Clutch
SLP Lid
I am looking to do a large cam soon, I daily drive my car so it has to be streetable. I would love to have a nice lope at idle, I want 400rwhp+. I am not completely against doing heads at the same time. Is there a Cam or H/C setup that will land me 450rwhp with a stock bottom end N/A and still be able to be street driven? I go to the dragway about every other weekend, I don't always run but I do if I change something up on the car.
08-09-2006, 02:41 PM
#2
TECH Enthusiast
iTrader: (8)
Join Date: Aug 2004
Location: Las Vegas
Posts: 718
Likes: 0
Received 0 Likes
on
0 Posts
i daily drive with my ms3 cam 237/242 113 lsa
I was questionable about it at first...but when i got it tuned it made a world of difference...my wife drove it and said its not that bad...with the ls7 clutch and a quiet exhaust its almost like stock.
I have the stock catback on with a 3in electric cutout...
its actually really quite driving around.
dynoed 443/384 with a 12 bolt , heads,pulley, tb,headers,ewp
IMO you can daily drive comfortably any off the self cam with a good tune.
its all up to you...,with all the deals on ls6 heads these days and good tuners its hard not to hit 450
I was questionable about it at first...but when i got it tuned it made a world of difference...my wife drove it and said its not that bad...with the ls7 clutch and a quiet exhaust its almost like stock.
I have the stock catback on with a 3in electric cutout...
its actually really quite driving around.
dynoed 443/384 with a 12 bolt , heads,pulley, tb,headers,ewp
IMO you can daily drive comfortably any off the self cam with a good tune.
its all up to you...,with all the deals on ls6 heads these days and good tuners its hard not to hit 450
08-09-2006, 03:59 PM
#3
FormerVendor
iTrader: (7)
Join Date: Apr 2003
Location: Lubbock
Posts: 1,106
Likes: 0
Received 0 Likes
on
0 Posts
http://www.texas-speed.com/ms4_0001.wmv
That is the new MS4, its a great cam for power through the powerband and peak. I personally know a few people who DD this cam w/ out problem and I have driven a car w/ this cam and it isnt bad at all. The sound is pretty incredible as well
If you need anymore information on this cam or any others for that matter feel free to ask!!
Thanks,
Zach
That is the new MS4, its a great cam for power through the powerband and peak. I personally know a few people who DD this cam w/ out problem and I have driven a car w/ this cam and it isnt bad at all. The sound is pretty incredible as well
If you need anymore information on this cam or any others for that matter feel free to ask!!
Thanks,
Zach
