stroker motor
#1
stroker motor
I just had a 382 ls1 stroker built. all forged bottom end, 10.8 to 1 compression, patriot heads 2.08 1.60 valves, fast 90/90 combo, msd coil packs, kooks 1 7/8 long tubes no cats magnaflow exhaust. 224 228 114 cam. car made 436 rwhp @ 5900 and 430 torque at 4600. I think this is really low. Any ideas as to what the problem could be. It is a 6spd car. with stock 3.42
#3
LS1 Tech Administrator
iTrader: (14)
Moved from advanced section.
__________________
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.
#4
TECH Regular
iTrader: (5)
Join Date: Jan 2004
Location: nyc
Posts: 437
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by rocky5
I just had a 382 ls1 stroker built. all forged bottom end, 10.8 to 1 compression, patriot heads 2.08 1.60 valves, fast 90/90 combo, msd coil packs, kooks 1 7/8 long tubes no cats magnaflow exhaust. 224 228 114 cam. car made 436 rwhp @ 5900 and 430 torque at 4600. I think this is really low. Any ideas as to what the problem could be. It is a 6spd car. with stock 3.42