Southeastern US Engine builders
#1
On The Tree
Thread Starter
iTrader: (4)
Join Date: Nov 2006
Location: OKC
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
Southeastern US Engine builders
Well...just finished pulling my 6.0L and...SHE IS SMOKED!! It looks as if a piece of the sparklug broke off in the cylinder and rattled around in there. Destroyed #7 piston and chamber in the head!! DAMN!! Well, I need to know a reputable engine builder/machine shop in either Alabama, Florida, Louisiana, Georgia or in the region. Thanks for your help!!!
#3
TECH Fanatic
iTrader: (1)
Join Date: Jun 2003
Location: Mount Dora, Fla
Posts: 1,876
Likes: 0
Received 0 Likes
on
0 Posts
I live north of Orlando and Erik@hkracingengines.com is in Texas and he's building my 408. He's the best of the best. Your plug most likely was not the cause of your problem with #7 but a result. Erik just built a 408 for a friend of mine who is asst service mgr at a Caddie dealership in Jax. He had #7 go out on him, lean/detonation. A piece of piston at 10 oclock broke off from the ring land, when we were racing at Gainesville.
#4
On The Tree
Thread Starter
iTrader: (4)
Join Date: Nov 2006
Location: OKC
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
WHAT bigdsz? I have a piece of my piston at exactly the 10 oclock position gone as well...and the piston rocks up and down inside the bore. I am betting you are exactly right!!! I think it was also just a really shatty build anyway.