back to stock cam, but having major issues
#1
TECH Addict
Thread Starter
iTrader: (8)
Join Date: Apr 2003
Location: Honolulu HI
Posts: 2,513
Likes: 0
Received 0 Likes
on
0 Posts
back to stock cam, but having major issues
I put the stock ls1 cam in my car. its a 370 iron block with stock ls6 heads, prc dual springs, 7.4", stock pulley, ls6 intake. I did the swap and now the car wont idle over 500 rpms. Its running super lean too. Any ideas where to start? Ask what you need to get more of an idea whats going on if ya have too.
#4
TECH Senior Member
Originally Posted by ninobrn99
I put the stock ls1 cam in my car. its a 370 iron block with stock ls6 heads, prc dual springs, 7.4", stock pulley, ls6 intake. I did the swap and now the car wont idle over 500 rpms. Its running super lean too. Any ideas where to start? Ask what you need to get more of an idea whats going on if ya have too.
You'll need 7.350s
You valves might be hanging open.
However, the super lean issue makes me suspect a vacuum leak.