Trev_SS

iTrader: (17)

quick questions about the ms4 and PRC ls6 stage 2.5's. I am about to order this setup just have 2 questions that i need answered tonight. Will the Heads and Cam work with out flycuting? What length pushrods will i need to use with this setup? and What Gasket will i need to use with this setup?
Thanks ALot guy's just need to know these quick questions I have searched and cannot find a single yes or no. If i am going to have to flycut would I be better off getting the MS3 with these heads, I am almost sure that I wouldn't have to flycut with that cam and those heads. Thanks alot guys just need those quick Answers.

Brian @ Texas Speed & Performance

iTrader: (1)

The stage 2.5 LS6 heads will not clear the MS4 without cutting the pistons. We typically ship the Stage 1 LS6 heads with the MS4 camshaft. If your wanting to cut the pistons we have the tools available for rent!

Trev_SS

iTrader: (17)

Hey Brian What about the magic stick 3 Cam will that fit with those heads with out flycutting, or would i be better going with the torque version 3 with those heads will the torquer version 3 pull hard up top too

blu1

since I can't seem to get an answer from a post, do you have any flow sheets available of the stage 2.5 LS6 heads? I'd really like to see the .200-.600 numbers. Also what advantages do they have over the stage 1 besides valve sizing?

venom ws7

iTrader: (13)

Those heads will clear with MS3 or Torquer 3 I have a couple friends with the same setup.

The PAT WS6

iTrader: (14)

bro y did u post the same thing twice.