Got a question about heads?
#1
TECH Apprentice
Thread Starter
Join Date: Jan 2007
Location: Hudson florida
Posts: 359
Likes: 0
Received 0 Likes
on
0 Posts
Got a question about heads?
There is this kid by me that has an ls2 gto that he is buying H/C/I n is selling his other heads n cam dirt cheap. I was wondering if his heads would bolt up to my ls1. if so what kinda power would they make? I also heard that they are ls6 heads but wasnt sure. Thanx for the help guys
#2
TECH Fanatic
iTrader: (1)
Join Date: Nov 2003
Location: Gardnerville, NV.
Posts: 1,037
Likes: 0
Received 0 Likes
on
0 Posts
Yes, they're LS6 head castings, but with SS valves. A good improvement from your 241 castings. His should be 243 castings if you can double check.
If you milled them about .030" and had them ported you'd be looking at some big HP with a good cam and exhaust setup. I'm not sure about the LS2 cam?
If you milled them about .030" and had them ported you'd be looking at some big HP with a good cam and exhaust setup. I'm not sure about the LS2 cam?