Tools Needed.......buy/borrow
01-30-2008, 08:31 PM
#1
Teching In
Thread Starter
iTrader: (5)
Join Date: Mar 2007
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Tools Needed.......buy/borrow My engine sits in my kitchen, the wife is not happy. Looking to buy or borrow the alignment tools for the oil pan and seals and the installation tool for the under drive pulley.
Posted before on CF and someone there offered to send them but I think they got busy traveling for work related issues, no worries there at all. So if someone can help me out I would be very appreciative. I'll gladly pay shipping both ways.
alignment tool # J 41480 and J 41476
the pulley tool is a custom made one.
thanks for any help
Posted before on CF and someone there offered to send them but I think they got busy traveling for work related issues, no worries there at all. So if someone can help me out I would be very appreciative. I'll gladly pay shipping both ways.
alignment tool # J 41480 and J 41476
the pulley tool is a custom made one.
thanks for any help
01-31-2008, 12:49 PM
#2
You don't need the tools for alignment. You can use a 6 speed bell housing or a straight edge to align the oil pan, then use the bolts that go through the oil pan into the front and rear covers to align said covers. I made my own pulley install tool with a bolt that was a bit longer than the stock crank bolt.
