HPT Tune request for mild cam
#1
HPT Tune request for mild cam
I'm a bit of a newbie around here, but i was hoping someone would be willing to share their .bin if they have a setup that's similar to mine.
*YES, I SEE THE STICKY! But i'm working with a dealer/tuner who is just getting started in the HP Tuners world, and he asked me to find a good baseline for my car before we start on it tomorrow. Since *I* don't have HPT, i can't get into the online database to find something like mine!*
My setup is:
2001 LS1 / Manual
224 @ .050 / .565 / 113LSA cam (single pattern)
1 & 3/4 mid-length headers, full exhaust (2.5 dual" to 3.5" single)
Cold air intake
--Speed density would be fine
--rear o2's deleted
I'd appreciate anything you can throw my way! My email is ccollord(at)hotmail.com
*YES, I SEE THE STICKY! But i'm working with a dealer/tuner who is just getting started in the HP Tuners world, and he asked me to find a good baseline for my car before we start on it tomorrow. Since *I* don't have HPT, i can't get into the online database to find something like mine!*
My setup is:
2001 LS1 / Manual
224 @ .050 / .565 / 113LSA cam (single pattern)
1 & 3/4 mid-length headers, full exhaust (2.5 dual" to 3.5" single)
Cold air intake
--Speed density would be fine
--rear o2's deleted
I'd appreciate anything you can throw my way! My email is ccollord(at)hotmail.com
#3
Thanks! I actually looked through that sticky, but it appears the database has been condensed and loaded onto HPT's site...which requires a password (serial #) to access. I'll go ahead and cross-post in the tuning section though, thanks
#6
I know i know....
Well the deal is, i'm getting a hookup price on this because they're still new to the software. My friend (who is a VERY experienced tuner) is coming along hoping to setup a business deal on their dyno and he's going to help tune my car. So i'm not terribly worried, but it would be nice for all parties if we had a good starting point
Well the deal is, i'm getting a hookup price on this because they're still new to the software. My friend (who is a VERY experienced tuner) is coming along hoping to setup a business deal on their dyno and he's going to help tune my car. So i'm not terribly worried, but it would be nice for all parties if we had a good starting point