Cam Install question
#1
TECH Fanatic
Thread Starter
iTrader: (8)
Join Date: Aug 2003
Location: Germany
Posts: 1,145
Likes: 0
Received 0 Likes
on
0 Posts
Cam Install question
I was just curious as to how long it would take (round about) for 1 man who has done 3 - 4 Cam / valve spring swaps in the past to do the swap. Thanks, just trying to get a feel for the time it takes.
Cam/Valve springs/rods and retainers.
Cam/Valve springs/rods and retainers.
#2
TECH Fanatic
iTrader: (1)
Re: Cam Install question
It depends alot on the tool he has for the valve springs, and wether he wants to take the time to use the magnets and whatnot.
Roughly 6-8 hours if he's taking his time and being careful. Ive done a cam swap in 3.5 hours myself, and Ive done a cam with springs in 5.5 myself. I did have a great spring tool though, and I used the compressed air to hold the valves up and I played lucky and let the lifters hang.
chris
Roughly 6-8 hours if he's taking his time and being careful. Ive done a cam swap in 3.5 hours myself, and Ive done a cam with springs in 5.5 myself. I did have a great spring tool though, and I used the compressed air to hold the valves up and I played lucky and let the lifters hang.
chris
#6
TECH Junkie
Join Date: Nov 2001
Location: Los Angeles
Posts: 3,604
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cam Install question
On an F-body for cam and spring I'd say 4-12 hours for one person, with 2 people maybe 3-8 hours.
Visceral and I double teamed a cam/spring swap a while back and it took 3 hours from drive in to drive out.
Visceral and I double teamed a cam/spring swap a while back and it took 3 hours from drive in to drive out.