LS3 & LS7 Width?
#1
On The Tree
Thread Starter
Join Date: Aug 2007
Location: Mid Michigan
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
LS3 & LS7 Width?
How much of a difference in width (birth) does the LS3 & LS7 have compared to the LS1? I know there is a difference just don't know how much.
I'm planning on 1 7/8" long tube headers but, I'm not sure what off road y-pipe will fit my Formula with a LS3 or LS7 installed. I'm planning on running stock style exhaust out the back. Seems as though a ORY for a LS1 won't quite fit unless it can be modified.
Anyone have experience with this?
Thanks,
Jim
I'm planning on 1 7/8" long tube headers but, I'm not sure what off road y-pipe will fit my Formula with a LS3 or LS7 installed. I'm planning on running stock style exhaust out the back. Seems as though a ORY for a LS1 won't quite fit unless it can be modified.
Anyone have experience with this?
Thanks,
Jim
Last edited by 96onele; 06-26-2010 at 08:43 PM. Reason: Added text.
#5
On The Tree
Thread Starter
Join Date: Aug 2007
Location: Mid Michigan
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
No not really. My assumption is because of the increased displacement of these two engines, there would a dimentional change in the birth of the engine especially in the cylinder head area. All though in may be less than an inch, it still may throw off exhaust alignment.
#6
TECH Resident
iTrader: (28)
But to the OP all of the LSx engines have the same outside dimensions...4.8 ,5.3 , 6.0 , 6.2 , 7.0 ....
http://www.csgnetwork.com/cubicinchcalc.html