Intake Suggestions, Please
#1
Intake Suggestions, Please
I have a 408 iron engine, running 11.6-1 compression. A set of PRC LS3 heads, cam 239-247, 624-624 lift, in a 02 T/A with a M6 trans. What intake would you guys recommend.
#3
TECH Addict
iTrader: (16)
assuming that you have a stock hood instead of a high rise cal hood.....you may be able to squeeze a Edelbrock pro flo xt in there easily...will still need some cutting on the cowl.
the mini ram does not fit and neither does the high ram.
the intakes with the elbows shine around 7000 rpm but they are not the greatest of them all.
your best bet would be a fast 92 or 102 or if your still hanging around 500-600rwhp then the ls6 is still a badass choice. just paint it if your not happy with it looking stock.
so pro flow xt or Fast IMHO
the mini ram does not fit and neither does the high ram.
the intakes with the elbows shine around 7000 rpm but they are not the greatest of them all.
your best bet would be a fast 92 or 102 or if your still hanging around 500-600rwhp then the ls6 is still a badass choice. just paint it if your not happy with it looking stock.
so pro flow xt or Fast IMHO