C6 Project is Alive
#1
TECH Resident
Thread Starter
iTrader: (1)
Join Date: Jul 2005
Posts: 923
Likes: 0
Received 0 Likes
on
0 Posts
C6 Project is Alive
Spent this weekend helping my buddy with his project on his C6. Got it fired tonight here is a vid. His name is Tim Palazzolo if you know him. Here is also a list of the parts. Will be getting it tuned by G-Force next week some time.
http://www.youtube.com/watch?v=UZ-VCIFjISY
1. FAST 90mm ported Intake
2. Ported 90mm TB
3. 7.450 Chromoly pushrods
4. Mike Norris Catch Can
5. Yella Terra Ultralight rocker arms
6. ASP Pulley
7. Kooks 1 7/8 Headers
8. Kooks 3" offroad X pipe
9. Meziere Polished Electric water pump
10. Katech Tensioner
11. FAST Firewall clearance kit
12. FAST MAP sensor relocation kit
13. FAST Stainless hardware kit
14. FAST LS2 Fuel rail adapter kit
15. Patriot EXTREME Dual Spring kit
16. GM Camshaft replacement kit
17. Taylor 10.4 Wires
18. 02 extensions
19. SBC 160 thermostat
20. Custom Ground Comp XE-R camshaft
http://www.youtube.com/watch?v=UZ-VCIFjISY
1. FAST 90mm ported Intake
2. Ported 90mm TB
3. 7.450 Chromoly pushrods
4. Mike Norris Catch Can
5. Yella Terra Ultralight rocker arms
6. ASP Pulley
7. Kooks 1 7/8 Headers
8. Kooks 3" offroad X pipe
9. Meziere Polished Electric water pump
10. Katech Tensioner
11. FAST Firewall clearance kit
12. FAST MAP sensor relocation kit
13. FAST Stainless hardware kit
14. FAST LS2 Fuel rail adapter kit
15. Patriot EXTREME Dual Spring kit
16. GM Camshaft replacement kit
17. Taylor 10.4 Wires
18. 02 extensions
19. SBC 160 thermostat
20. Custom Ground Comp XE-R camshaft
#3
TECH Resident
Thread Starter
iTrader: (1)
Join Date: Jul 2005
Posts: 923
Likes: 0
Received 0 Likes
on
0 Posts
It's nasty for sure. We are hoping for more than that but who knows. The cam is about as big as you can safely go with a hyraulic lifter on a stock ci. But I will post up the final numbers soon.