need heads intake help???
#1
Teching In
Thread Starter
Join Date: Oct 2007
Location: knoxvegas tn
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
need heads intake help???
hey guys I have been in the process of going with my second round up upgrades with my06. I have cam and all the stuff to hold it up, I am looking to do heads intake, but I am lost on this. I wanna make some good power ,but I dont wanna spend like 3k on doing so. I wanna do heads intake TB. I am thinkin of getting a ported and polished tb from ls2 portworks. Although I am still kinds lose on heads intake. Will I benfit from the l92\76 set up??? Or is their more power to be made somewhere else in diff products???? The heads are where your power is I know this, but the intake is where I am lost will I make as much power with the stock ported as I would a fast? I am lost on this so input help would be great thanks...
#4
LS1Tech Premium Sponsor
iTrader: (4)
I put our PRC CNC ported l92 heads & a 228 camshaft in my a6 c6 with great results. That car made approx 465rwhp through the automatic! The PRC l92 heads made 18rwhp than a standard 6.2l head on the engine dyno!
For the ls2 guys I think it's a pretty hard package to beat!
For the ls2 guys I think it's a pretty hard package to beat!
__________________
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com