Need a Mild Cam for 402 Twin Turbos
05-13-2008, 10:27 AM
#1
10 Second Club
Thread Starter
iTrader: (24)
Join Date: Jul 2007
Location: Texarkana
Posts: 933
Likes: 0
Received 0 Likes
on
0 Posts
Need a Mild Cam for 402 Twin Turbos My kit is finally on the way from AUS and I cant wait to put this GEN TTr on my car. I have talked to several people here and on LS1GTO and just wanted to get a few more opinions. Each of the Sponsors I call have given me completly different specs.
What I am looking for is a stock like IDLE, no surging. If I was staying with the LS1 I know what cam I would use, but since I am going to the 402 I know they behave a little differently and you can get a little more. I guess I need a real low-mid range power since the turbos will give me all I can handle up top.
All help is appreciated!
The heads are Fully Worked 317 Heads (Springs, retainers, valves etc), with Ported Fast 90/90
What I am looking for is a stock like IDLE, no surging. If I was staying with the LS1 I know what cam I would use, but since I am going to the 402 I know they behave a little differently and you can get a little more. I guess I need a real low-mid range power since the turbos will give me all I can handle up top.
All help is appreciated!
The heads are Fully Worked 317 Heads (Springs, retainers, valves etc), with Ported Fast 90/90
