n00b from central illinoise
02-03-2012, 07:16 AM
#1
Teching In
Thread Starter
Join Date: Jan 2011
Location: Illinois
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
n00b from central illinoise Yo...
Relatively new to the LS stuff. Got a couple moostangs and a C5 FRC for toys. Currently working on getting an LS7-headed ERL 434ci bullet together for the vette. In my many google searches, over the past several months, this site always seems to come up... thanks to those who've posted good info on here. It's appreciated.
-RLS
Just recently rebuilt the trans (M12)...
I rebuilt the torque tube as well (PST carbon 'shaft, DSS poly couplers, RPM bearing kit). The diff is a stock 3-rib out of an '01... I disassembled/cleaned/resealed it.
The next phase of the build is to install/degree the LPE GT19 cam and hopefully have this pile of parts on the road by spring/summer. It's been a good time, so far. Pushrods, FTW.
Relatively new to the LS stuff. Got a couple moostangs and a C5 FRC for toys. Currently working on getting an LS7-headed ERL 434ci bullet together for the vette. In my many google searches, over the past several months, this site always seems to come up... thanks to those who've posted good info on here. It's appreciated.
-RLS
Just recently rebuilt the trans (M12)...
I rebuilt the torque tube as well (PST carbon 'shaft, DSS poly couplers, RPM bearing kit). The diff is a stock 3-rib out of an '01... I disassembled/cleaned/resealed it.
The next phase of the build is to install/degree the LPE GT19 cam and hopefully have this pile of parts on the road by spring/summer. It's been a good time, so far. Pushrods, FTW.
