FreeTheBird612

Looking to do some engine and suspension mods looking for some great advice , the car I bought is a 2001 ws6 Trans Am 77k A4 the mods done before I purchased were SLP lid, Ceramic BBK headers, x pipe into magnaflow muffler (not sure if I like exhaust set up) had car tuned she pulled very strong at RW dyno numbers were 331rwh 348lbs torque

WHTLTN2

first off what is your budget, horsepower goals, and i'd start out with a cam and heads from LLoyd elliot i'd either email him or call him and he'll set you up with cam and heads for around $3,000 depending on your location and he'll push you in the right direction on what you need to achieve your goals and what springs and rocker arms you may need to support the cam and heads combo.

Orange Juice

iTrader: (3)

There are a lot of H/C packages out there. It just depends on your budget. Remember once you increase or make better one part of the car you are going to put strain on another. Such as upping the injectors and fuel pump after H/c

JDEP162

good deal post pics