Fun racing Friday night, Pics..
#1
Fun racing Friday night, Pics..
Took a few quick shots before I went out for quick drive. The car is really starting to feel damn good. I'm pulling the plugs (NGK TR55 coppers) and putting new ones in, going to put two new Bosch O2's in the car also on Sunday. Does anyone know if the O2's in the longtube are considered pre or post O2's ? I thought they were pre O2's (just not sure). I will be slowly modding this car more and more, now that I can work on it any time I want now. I have boxes and boxes of stuff to install.
I was sneaking around Plano tonight and had a few possibles, but only one race (not really a race). Running along DNT (Dallas North Tollway) up by Frisco Mall. I come up to the light and a LS1 Z28 pulls up beside me and it sounds like it has a small cam ( and I'm sure the complimenting mods ). He looks over and gives me the nod, I respond with a bring up the R's in 1st to 3,700 rpm's ( Drag radial are nice and warm ). He responds with a similar RPM level and the light goes green and POW the LTx responds with a gut punch and I have a 1/2 of a fender on him through 1st (shift @ 6200) get a nice scratch on the serrated concrete. I actually pulled him another 1/2 fender to the top of 2nd (6000 rpm) and right when I jammed 3rd I heard the infamous crunch of his T56 (missed shift). It sounded so bad I even cringed in my car ! We tried one more time from a 1st gear roll and he mangled his 1 / 2 shift again, at that point I think he was disgusted with himself and I'm pretty sure he hurt something in the tranny (car did not sound good after that). I told him he probably would have murdered me up if we had got into the top of 3rd or 4th and let his cam work for him. He took it nice enough and just said " you have a real nice LT1 car " and we went are separate ways.
I had two other possibles, but neither would bite.
1. 350Z with big red brakes and phat azz rims (he just plain hated)
2. C6 Z06 (Blue & Bad): I did not really try to get this guy to run but
I was prepared to take my raping if he would have gone for it. I really
wanted to see how bad I would get mangled up by one of these
monsters. It was completely stock as far as I could tell, but he
was just cruising so I respected the Z0h and left well enough alone
for the evening.
Side shot ( a little dark, but I like it)
Here are some azz pics before the evening started:
This was the money shot for the night, it looks frickin ridiculous from this angle. I suspect this is the shot that got me into all the trouble tonight.
I was sneaking around Plano tonight and had a few possibles, but only one race (not really a race). Running along DNT (Dallas North Tollway) up by Frisco Mall. I come up to the light and a LS1 Z28 pulls up beside me and it sounds like it has a small cam ( and I'm sure the complimenting mods ). He looks over and gives me the nod, I respond with a bring up the R's in 1st to 3,700 rpm's ( Drag radial are nice and warm ). He responds with a similar RPM level and the light goes green and POW the LTx responds with a gut punch and I have a 1/2 of a fender on him through 1st (shift @ 6200) get a nice scratch on the serrated concrete. I actually pulled him another 1/2 fender to the top of 2nd (6000 rpm) and right when I jammed 3rd I heard the infamous crunch of his T56 (missed shift). It sounded so bad I even cringed in my car ! We tried one more time from a 1st gear roll and he mangled his 1 / 2 shift again, at that point I think he was disgusted with himself and I'm pretty sure he hurt something in the tranny (car did not sound good after that). I told him he probably would have murdered me up if we had got into the top of 3rd or 4th and let his cam work for him. He took it nice enough and just said " you have a real nice LT1 car " and we went are separate ways.
I had two other possibles, but neither would bite.
1. 350Z with big red brakes and phat azz rims (he just plain hated)
2. C6 Z06 (Blue & Bad): I did not really try to get this guy to run but
I was prepared to take my raping if he would have gone for it. I really
wanted to see how bad I would get mangled up by one of these
monsters. It was completely stock as far as I could tell, but he
was just cruising so I respected the Z0h and left well enough alone
for the evening.
Side shot ( a little dark, but I like it)
Here are some azz pics before the evening started:
This was the money shot for the night, it looks frickin ridiculous from this angle. I suspect this is the shot that got me into all the trouble tonight.
Last edited by 96silverram; 10-14-2008 at 05:04 PM.
#3
All BMR, Strano, Baer, Wilwood, QA1 coilovers all 4 corners, some custom stuff.
Few pics of the suspension from another thread: https://ls1tech.com/forums/street-racing-kill-stories/1000208-1st-race-car-texas.html
I love those French canadian women you have up there ! Use to live in the Tri-state for a long time.
Few pics of the suspension from another thread: https://ls1tech.com/forums/street-racing-kill-stories/1000208-1st-race-car-texas.html
I love those French canadian women you have up there ! Use to live in the Tri-state for a long time.
#6
Staging Lane
Join Date: Jul 2008
Location: Austin, Tejas
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Yeah man! nice black exhaust wells tells everyone you're not afraid to open it up! Everyone wants a piece of a late model TA I'm sure. Sounds like you're having a ton of fun. Be careful out there.
Trending Topics
#8
Flash LCD33,
The rims are a one off set from DAZZ Motorsports International. I supposedly have the only set of MATIZ 3 piece ever built for an F-body, bought the rims way back in 99' or 00'.
96LT1M6,
"BABY GOT BACK" LA face with the Oakland booty !
Rubrignitz,
Yes, a ton of fun. I agree on the being careful, I need to cool it for a couple of days.
Boomer Sooner,
Thanks
The rims are a one off set from DAZZ Motorsports International. I supposedly have the only set of MATIZ 3 piece ever built for an F-body, bought the rims way back in 99' or 00'.
96LT1M6,
"BABY GOT BACK" LA face with the Oakland booty !
Rubrignitz,
Yes, a ton of fun. I agree on the being careful, I need to cool it for a couple of days.
Boomer Sooner,
Thanks
#20
All BMR, Strano, Baer, Wilwood, QA1 coilovers all 4 corners, some custom stuff.
Few pics of the suspension from another thread: https://ls1tech.com/forums/showthread.php?t=1000208
I love those French canadian women you have up there ! Use to live in the Tri-state for a long time.
Few pics of the suspension from another thread: https://ls1tech.com/forums/showthread.php?t=1000208
I love those French canadian women you have up there ! Use to live in the Tri-state for a long time.
yep,French Canadian broads = horny.