ElkySS

iTrader: (6)

my pcv valve looks like its been bypassed. i have an intake off of a b body LT1 and it has a pcv line running from the front of the intake to the middle of the driver side. on my stock f body intake, it just loops around to one of the nearby vacuum ports. (on the driver side) is this supposed to be like this? if not what are all the vacuum ports on the driver side for? (so i can figure out where the other port is supposed to go)

ElkySS

iTrader: (6)

sry i dont have a camera.

ElkySS

iTrader: (6)

anyone? the one its connected to is the one right under and behind the big one for the brake booster. what is supposed to be there?

Schweet97Z

iTrader: (35)

http://shbox.com/1/pcv_pipe.jpg That is how the PCV system should be hooked up.

Here is a picture of everything else thats labeled for ya http://shbox.com/1/opti_vacuum_conn.jpg

ElkySS

iTrader: (6)

but what about on my 94? the one its connected to is the one that says its for the opti in that pic

SnakeOiler

iTrader: (6)

Better question: on your 94, the hose connected to your PCV valve goes to where?

ElkySS

iTrader: (6)

it goes to the vacuum port that i guess is used for the opti vent on the newer ones