New set of Morel lifters have squish?
#1
Launching!
Thread Starter
iTrader: (16)
Join Date: Nov 2001
Location: north Dallas, Texas
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
New set of Morel lifters have squish?
I just received a new set of Morel solid lifters.
These lifters can squeeze down around 0.150-ish with a pushrod in hand.
My other set of Morels (bought a few years ago)don't squeeze down any, by
hand.
Is Morel making their solid lifters different now?
Is this like everyone elses recent Morel solid lifters?
I'm assuming that I still set my lash after the lifter squish and down to where
the lifter doesn't give anymore, is that correct?
Jay Johnson
These lifters can squeeze down around 0.150-ish with a pushrod in hand.
My other set of Morels (bought a few years ago)don't squeeze down any, by
hand.
Is Morel making their solid lifters different now?
Is this like everyone elses recent Morel solid lifters?
I'm assuming that I still set my lash after the lifter squish and down to where
the lifter doesn't give anymore, is that correct?
Jay Johnson
#3
FormerVendor
If you have the solids they have a chamfer around the pushrod cup where as the hydraulics do not and just have a normal pushrod cup. Like Kurt says you have the hydraulics.