rear end on 454ss truck??
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Oct 2007
Location: Keller tx
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
rear end on 454ss truck??
can someone find out what rear end is in it not ur if its the dana 60 or 44?
tryn to figure out cause needs to get some work done on it but not sure on what parts to order!
thanks!!
tryn to figure out cause needs to get some work done on it but not sure on what parts to order!
thanks!!
#4
Damn tons of wrong ****.
Dana 44's come on the rear of some jeeps.
A real 454SS truck has a GM Corporate 14 bolt with a 9.5 ring gear. Semi floating axles AND FIVE LUGS. This is why the 454SS 14 bolt is so rare, because it's the only 14 bolt that has 5 lugs.
If your parts guy is being a dumbass get parts for a 3/4 ton 14 bolt semi floater, the only difference is the axles and drums (again because 3/4 tons have six lugs---454SS five lugs)
Go ask at 454ss.com, get flamed for asking a beat to death question.
Dana 44's come on the rear of some jeeps.
A real 454SS truck has a GM Corporate 14 bolt with a 9.5 ring gear. Semi floating axles AND FIVE LUGS. This is why the 454SS 14 bolt is so rare, because it's the only 14 bolt that has 5 lugs.
If your parts guy is being a dumbass get parts for a 3/4 ton 14 bolt semi floater, the only difference is the axles and drums (again because 3/4 tons have six lugs---454SS five lugs)
Go ask at 454ss.com, get flamed for asking a beat to death question.
#6
Teching In
Thread Starter
iTrader: (1)
Join Date: Oct 2007
Location: Keller tx
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
how do i find out how many splines i got?? i was gonna put a posi in it but they so damn expensive.. like 600 for one and they dont make mini spools for my rear end then i heard i could weld the spider gears but i cant do that witha a limited slip so now i need to find a open carrier but i needa find out how many splines i got so i can find the rite one
help please!!!!
help please!!!!