Intercooler2

iTrader: (24)

Thinking about going this route instead of buying two extra Speedlines to mount racing tires on.

So 15x4 with 1.75" BS and 15x10 with 7.5" BS are the optimum wheels to fit? Anyone have my color with the Greg Welds installed?

DopdBrd

iTrader: (25)

Ruckus94GT has them on his Pewter Camaro. But only the front's.

Read around and do a search. The fronts fit perfect and look good. But the rears are a different story.

Intercooler2

iTrader: (24)

I know I will probably have to grind. Since nobody has these on Pewter how about basic Stars?

DopdBrd

iTrader: (25)

Apparently you didn't read around, the Greg Welds don't fit AT ALL, no matter what. skinnies put the rears on with LT1 brakes, but ground them down to nothing. I tried grinding them down on my LT1 and had to replace the caliper when I was done.

Camaro396

iTrader: (14)

They will bolt onto the front but you will never get the rears to fit. You will have to go with Weld Prostars.

Intercooler2

iTrader: (24)

So Prostars on the back with a little grinding. Wish someone had a picture.

Camaro396

iTrader: (14)

Yes. I have Weld Prostars in the back, with Greg Welds in the front..Picture is in my sig..

Intercooler2

iTrader: (24)

Doesn't look Pewter or WS-6 LOL

Camaro396

iTrader: (14)

Lol, you get the idea! They will look good. Ruckus46GT has the same setup on his pewter Z28. Looks killer. Just do it!

01ws6450hp

iTrader: (43)

Not pewter but it is a trans am. Pictures suck but you get the idea.