Patriot Stage II 5.3L's installed
#1
Patriot Stage II 5.3L's installed
finally got around to installing my PP 5.3L StageII's milled .015 this weekend. they are actually 4.8L castings but same difference
install was pretty straight foward. took about 15 hours spread over 3 days.
very noticable power increase and so far ive very very pleased with the performance
track times and dyno's coming shortly
fyi, if you plan on installing heads and just dropping the headers down some to get to then bottom head bolts, make sure you remove the o2 sensors and dont just unplug them. i got coolant on mine and toated both o2 sensors. for those who remember my recent threads, this appears to have been the problem
install was pretty straight foward. took about 15 hours spread over 3 days.
very noticable power increase and so far ive very very pleased with the performance
track times and dyno's coming shortly
fyi, if you plan on installing heads and just dropping the headers down some to get to then bottom head bolts, make sure you remove the o2 sensors and dont just unplug them. i got coolant on mine and toated both o2 sensors. for those who remember my recent threads, this appears to have been the problem
#5
LS1Tech Premium Sponsor
iTrader: (4)
Re: Patriot Stage II 5.3L's installed
Glad your happy with the setup man!
Yeah its pretty hard to beat 1295 for stage 2 heads! We went to Patriot this weekend & got to see how much time & effort Terry puts into his heads. What a great company!!!
Jason
Yeah its pretty hard to beat 1295 for stage 2 heads! We went to Patriot this weekend & got to see how much time & effort Terry puts into his heads. What a great company!!!
Jason
__________________
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com