Used Block, What to have done.
10-14-2003, 09:43 AM
#1
TECH Fanatic
Thread Starter
iTrader: (9)
Join Date: Jan 2002
Location: DFW
Posts: 1,245
Likes: 0
Received 0 Likes
on
0 Posts
Used Block, What to have done. I picked up a used Ls1 5.7 block, I know I am going to have it bored and honed to 3.905, and new cam bearings installed, what else needs to be done?
thanks
kyle
thanks
kyle
10-15-2003, 08:23 AM
#3
Staging Lane
Join Date: Sep 2003
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
Re: Used Block, What to have done. I was talking to the machinist the recently about what he thought should be done to my new block. I mentioned line honing and he said that with the different materials between the caps and block that line honing is pretty tricky. The hone has a tendency to dig into the aluminum.
What he told me was to plasitage the crank and not fix something thats not a problem.
What he told me was to plasitage the crank and not fix something thats not a problem.