Drag Racing Tech
Sponsored by:
Sponsored by:

M6 guys with HALs

Thread Tools
 
Search this Thread
 
Old 03-12-2009, 09:17 PM
  #1  
11 Second Club
Thread Starter
iTrader: (4)
 
I8AFORD's Avatar
 
Join Date: Dec 2001
Location: Indiana
Posts: 1,086
Likes: 0
Received 1 Like on 1 Post
Default M6 guys with HALs

What is a good starting piont to set the shocks @

IF the track is loose how to adjust for that?

thanks for any advice
Old 03-13-2009, 06:23 AM
  #2  
Internet Mechanic
iTrader: (17)
 
BlackScreaminMachine's Avatar
 
Join Date: May 2005
Location: Wallingford CT
Posts: 9,830
Likes: 0
Received 2 Likes on 2 Posts

Default

As for actual Numbers, the fronts can be on the looser side between 1-3, and the rears definitly stiffer in the 5-6 range and then go take a hit.

Dunno what swaybar your using but your also going to have to monitor how much the car's body mushes to the right.
Old 03-13-2009, 07:34 PM
  #3  
10 Second Club
iTrader: (1)
 
mike c.'s Avatar
 
Join Date: Mar 2002
Location: mi
Posts: 4,033
Likes: 0
Received 2 Likes on 2 Posts

Default

I set the fronts at #2 to #1. the rears I put the driver side at #5 and the pass at #6. I even tried #6 and #7 in rear and did'nt change the 60 foots. I 60 foot 1.42 best and 1.44 all day.m6,4.11's 26x11.5x15 M&H Racemaster cheeter slicks.
Old 03-13-2009, 11:18 PM
  #4  
10 Second Club
iTrader: (17)
 
Demonicbird00's Avatar
 
Join Date: Apr 2004
Location: Alloway,NJ
Posts: 2,409
Likes: 0
Received 0 Likes on 0 Posts

Default

tonite my first nite out w/ the hals i had 2 up front and rear was 8 then took it to 7 then back again.

after never pulling wheels before and tonite i pulled them on almost every run and its a really weird feeling lol, i kept lifting. so FYI dont lift your foot when your wheels go up

-brandon
Old 03-14-2009, 12:24 PM
  #5  
11 Second Club
Thread Starter
iTrader: (4)
 
I8AFORD's Avatar
 
Join Date: Dec 2001
Location: Indiana
Posts: 1,086
Likes: 0
Received 1 Like on 1 Post
Default

OK thanks

the higher the rears are will that not let the car squiat




All times are GMT -5. The time now is 11:38 PM.