WTB: Stock LS1 pistons and rods
#3
TECH Enthusiast
iTrader: (51)
Join Date: Jul 2008
Location: Billings, Mt
Posts: 616
Likes: 0
Received 0 Likes
on
0 Posts
ive got rods out of a 5.3 that still have the pistons on them, all you would need to do is have the pistons pressed off and your good to go. id take $77.25 that includes shipping and paypal fees.
#4
On The Tree
iTrader: (21)
Join Date: Jul 2008
Location: Fort Worth, Tx
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Not sure how much your looking to spend but I have a set of LS6 rods and pistons from a brand new crate motor. They include new rings and rod bearings. I'd like to get $325 shipped for them.
They have factory rod bolts in them but of course it would be a good idea to replace them. I will also throw in a set of brand new in the package arp rod bolts for $375 total.
They are at the machine shop right now but I will picking them up later this week when my new pistons come in. Turns out my block, which was supposed to be stock bore, had already been bored to 3.904 say I can't use them anymore.
They have factory rod bolts in them but of course it would be a good idea to replace them. I will also throw in a set of brand new in the package arp rod bolts for $375 total.
They are at the machine shop right now but I will picking them up later this week when my new pistons come in. Turns out my block, which was supposed to be stock bore, had already been bored to 3.904 say I can't use them anymore.