Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

A/F and Timing

Thread Tools
 
Search this Thread
 
Old 03-15-2009, 03:25 PM
  #1  
Teching In
Thread Starter
 
drew01ss's Avatar
 
Join Date: Mar 2009
Location: Baltimore, MD
Posts: 17
Likes: 0
Received 0 Likes on 0 Posts
Default A/F and Timing

What a/f should i have with 100 wet shot and 150 shot? How much timing do I pull out for each shot? Going to tune on dyno this week, Thanks in advance BTW what is too rich or too lean? Currently at 10.5 af 100 wet shot with 1 degree out

Last edited by drew01ss; 03-15-2009 at 03:58 PM.
Old 03-16-2009, 09:23 AM
  #2  
FormerVendor
iTrader: (4)
 
Nick@HSW's Avatar
 
Join Date: Jul 2005
Location: Glenolden, PA
Posts: 1,954
Likes: 0
Received 0 Likes on 0 Posts
Default

You can lean it out a little bit into the 11.2 range. Timing is going to depend on if your timing has ever been advanced.

Nick
Old 03-16-2009, 10:12 AM
  #3  
Teching In
Thread Starter
 
drew01ss's Avatar
 
Join Date: Mar 2009
Location: Baltimore, MD
Posts: 17
Likes: 0
Received 0 Likes on 0 Posts
Default

what is stock timing? I bought the car used, so don't know if it's been advanced. I have the Harris speed works a/f and timing controller to adjust the timing, and a friend of mine has a tuner to see what the timing is. How much should I pull for a 100 and a 150 shot? Should a/f be the same for both at 11-2?
Old 03-16-2009, 10:54 AM
  #4  
Chris@NitroDaves
Guest
 
Posts: n/a
Default

Stock timing should be set at 26*..

For both kits you will want to see the AFR around 11.2-11.8 and no more than that.

-Chris
Old 03-16-2009, 11:12 AM
  #5  
Teching In
Thread Starter
 
drew01ss's Avatar
 
Join Date: Mar 2009
Location: Baltimore, MD
Posts: 17
Likes: 0
Received 0 Likes on 0 Posts
Default

How much timing do I pull for 100 and 150 shot?




All times are GMT -5. The time now is 12:14 PM.