Single plane and crank trigger questions
04-16-2009, 08:49 PM
#1
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Jan 2008
Location: Cincinnati Ohio
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
Single plane and crank trigger questions I have a set of LT4 heads that are ported by Llyod. And im wanting to do a single plane intake. Im looking at the Edelbrock 29785 intake with fuel rails.
The heads are ported for the 12367777 gaskets. But since the heads are still off the motor, im going to drill and tap the heads for the intake. What gasket is everyone running with that intake?
I was looking at the Fel Pro 1206 gasket.
Also which crank trigger are guys running?
The heads are ported for the 12367777 gaskets. But since the heads are still off the motor, im going to drill and tap the heads for the intake. What gasket is everyone running with that intake?
I was looking at the Fel Pro 1206 gasket.
Also which crank trigger are guys running?
