NEW PROJECT! need advise
04-29-2009, 03:09 PM
#1
Teching In
Thread Starter
Join Date: Feb 2009
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
NEW PROJECT! need advise I started a new project and I'd like to get some imput on what fuel system to run....
The project is a 96 Ford F-150 standard cab short bed. It is a fully tubed chassis, three linked with 30" of travel
, fiber glass body (pre runner)
I am puting a stock LS1 out of a trans am in it and I id like to get some opinions on a fuel set up.
I have already decided to run the aeromotive a1000 pump in case i decide to do forced induction later all I have to do is upgrade the rails and injectors..
What do you guys think I need in the way of: return line, fuel lin, regulator, fuel cell? Basically what all do I need to make a complete aftermarket kit work on a stock LS1.
The project is a 96 Ford F-150 standard cab short bed. It is a fully tubed chassis, three linked with 30" of travel
, fiber glass body (pre runner)I am puting a stock LS1 out of a trans am in it and I id like to get some opinions on a fuel set up.
I have already decided to run the aeromotive a1000 pump in case i decide to do forced induction later all I have to do is upgrade the rails and injectors..
What do you guys think I need in the way of: return line, fuel lin, regulator, fuel cell? Basically what all do I need to make a complete aftermarket kit work on a stock LS1.
Last edited by gtmustang003; 04-29-2009 at 09:59 PM.
