Fueling & Injection Fuel Pumps | Injectors | Rails | Regulators | Tanks

From Walbro to Racetronix Pump

Thread Tools
 
Search this Thread
 
Old 05-18-2009, 08:30 AM
  #1  
On The Tree
Thread Starter
iTrader: (6)
 
Z28Camaro01's Avatar
 
Join Date: Aug 2005
Location: S/w Virginia
Posts: 161
Likes: 0
Received 0 Likes on 0 Posts
Default From Walbro to Racetronix Pump

About a year ago I had a Walbro pump installed a couple of weeks ago it was around 93* out and it would seem as though I have the Overheating Fuel Pump issue. I had 3/4 of a tank. I plan to upgrade to the racetronix pump however due to walbro pump install I think I need a new fuel bucket. Who has gone from Walbro to Racetronix and did you replace the bucket? if so where did you get it? Thanks in advance for your help.
Old 05-18-2009, 08:44 AM
  #2  
Launching!
 
knappbunch's Avatar
 
Join Date: May 2008
Location: va beach
Posts: 282
Likes: 0
Received 0 Likes on 0 Posts
Default

check the walbro pump I had a walbro from holley which I think was a chinese piece o crap. any reinstalled one from walbro actual walbro pump and it has been fine ever since. lot of chinese knocjk off pumps out there.
Old 05-18-2009, 09:05 AM
  #3  
On The Tree
Thread Starter
iTrader: (6)
 
Z28Camaro01's Avatar
 
Join Date: Aug 2005
Location: S/w Virginia
Posts: 161
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by knappbunch
check the walbro pump I had a walbro from holley which I think was a chinese piece o crap. any reinstalled one from walbro actual walbro pump and it has been fine ever since. lot of chinese knocjk off pumps out there.
The one I got came from TSP. Think it could have still just been a crappy pump?




All times are GMT -5. The time now is 10:12 AM.