MS4 cam good for stock motor??
#1
Staging Lane
Thread Starter
Join Date: Mar 2009
Location: Spring,Tx
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
MS4 cam good for stock motor??
Ok i have a 2000 z28 camaro and its auto...all i have is TSP 1 7/8 headers TSP Y pipe and a SLP exhaust and tuned.....and i wanted to know if my stock motor can take the MS4 cam like could i run it with out a problem??...or would i need to get heads?.....cause i just want a good strong cam for right now..any help would be great thanks
#2
well i had this cam in my car but i was a m6. i had this cam with stock 243's. so you should be just fine. just make sure you get a stall that will get along with this beast of a cam. in my stick car this thing would pull like a mother in third and fourth gear. i mean thats where i would start walking people. evcen people who had more done than i did.
#3
I agree with 00pewtertransam my ms4 pulls like a freight train in third and fouth gear. It is like it builds up boost in the first and second gear and then BAM!!!!! That bitch is gone.
#5
yeah it is crazy how it just takes off up top. i now have a different motor so now have a bigger cam but. i do miss that cam. it turned so many heads when i started it up and you heard that chop.
#6
Trending Topics
#8
this is why i said find the right stall!!!!!
#11
i have a friend with a 02 camaro with the ms3 auto with a small 2500 stall 3:73's and went 11.95. runs low 12's everytime he touches the track. he has sprayed a 100 shot to a 11.1
#13
Also I daily drive the car and it drives just fine. You have to have a good tuner. My tuner takes it out on the street and we tune until I fill like I have were I want it. I have 4.10 gears with my M6 and I can cruise at 65 in 6th gear with the rpms at 14-1500 rpms just fine with out any surging. Good luck with what ever you choose. The MS4 is a great off the shelve cam.
#16