LT1 6 SPD Vega...`
#1
TECH Apprentice
Thread Starter
iTrader: (2)
Join Date: Mar 2008
Posts: 360
Likes: 0
Received 0 Likes
on
0 Posts
LT1 6 SPD Vega...`
I am Planning on doing a LT1 Swap into a Vega. Would anyone have any information on this or guidelines or anything at all. I Have the Vega and am Trying To buy a 94 Camaro with a 6M so hopefully i will have everything thing i need. I can Get the Motor in the Car but i am a little Sketchy on the Electronics Part of everything. Dont Know how to hook it all up. I heard that you can buy a Painless Wiring Kit for about 650 But really didnt want to spend that much. any Informatoin would be greatful Thanks. Garrett
#2
On The Tree
iTrader: (1)
Join Date: Jun 2006
Location: Gilbert, AZ
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
Go to h-body.org and join the forums. Great bunch of people with tons of knowledge on these cars. I personally have a have a 75 Pontiac Astre with a 350. Pretty simple swap. Same basically as the LT1, w/o the wiring. I think we have an LT1 on the board. We have TPI's, and LS1's for sure.
#4
TECH Apprentice
Thread Starter
iTrader: (2)
Join Date: Mar 2008
Posts: 360
Likes: 0
Received 0 Likes
on
0 Posts
Well I dont know Really... My Bigget Question is going to be the Wiring. I talked to one guy said i can buy a painless kit and its like 650 but i dont want to spend that much money. I mean if i have to i guess but thats alot.
#6
TECH Apprentice
Thread Starter
iTrader: (2)
Join Date: Mar 2008
Posts: 360
Likes: 0
Received 0 Likes
on
0 Posts
Im not sure about Guages yet i dunno if any of the Vega ones will work Doubt it but i was also thinking about trying to use the stock camaro dash. Dunno. But the Fuel System will just be a stock Pump in a Modified Stock Vega Tank. I talked to a local auto shop that put an LT1 in a 57 Chevy and i got to look at the Tank that is pretty simple really. he is the one who told me about the painless kit but i havent got to talk to him alot cause i know he will know alot about it.