MattysTA

iTrader: (18)

anybody else ever have this happen? it did to me. my ring gear bolts apparently got loose and i sheered off three of them.

jcws6

iTrader: (1)

Happened to me last year. Rear was rebuilt before I bought the car, dumbass installer probably didn't Loctite the bolts. 2 teeth sheared off the pinion, in my case.

01ssreda4

iTrader: (96)

yep its very common, guy i know had it happen to him.

Johnny-LT1-runner

iTrader: (15)

Holy hell! That looks nasty!

spcearle

iTrader: (9)

mine just did this but all my bolts came out ....have 2 to unlodge still but so far everything inside looks good still...hell with the exeption of one bolt which was bent in half the bolts still look good.....mine was locktited in 2 years ago when the rear was done...anyone figure out what causes them to loosen or a better loctite to use

cambirdracing

iTrader: (4)

They are left hand threads. Probably whoever built the rears didnt' use the proper torque wrench to tighten them and just guessed at how tight they were.