What RPMs are shift points on 97 LT1 Auto?
#1
Teching In
Thread Starter
Join Date: Jul 2009
Location: Ft. Worth, TX
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
What RPMs are shift points on 97 LT1 Auto?
I installed a used tranny today and everything felt fine as far as shifting goes and all gears work. Now when I punched it and it downshifted, it went to redline without shifting back up. I backed off once I got to 5500 RPM. So should it have downshifted by then or did I let off too soon?
I also have some misfiring too that I have to tackle tomorrow so it took a little longer than usual to get there.
I also have some misfiring too that I have to tackle tomorrow so it took a little longer than usual to get there.
#2
get the driveability issue fixed....a driveability issue willaffect the performance of the transmission since it is electronically controlled....also shift points are set by the PCM not the tranny or i should say not an electronic tranny
__________________
https://ls1tech.com/forums/image.php...ine=1194732633
Free Cooler, Free shipping always, 2 year warranty Trans/Coverter combos, No Core or Core charge, $150 LS1 core buy back, All trans Dyno Tested to Be sure it works when you get it.Customer videos, Tech Thread, Open 7 Days a Week! Call or http://opi.yahoo.com/online?u=performabuilt&m=g&t=2Click Banner for Website.
Not Just Built.....PerformaBuilt!
https://ls1tech.com/forums/image.php...ine=1194732633
Free Cooler, Free shipping always, 2 year warranty Trans/Coverter combos, No Core or Core charge, $150 LS1 core buy back, All trans Dyno Tested to Be sure it works when you get it.Customer videos, Tech Thread, Open 7 Days a Week! Call or http://opi.yahoo.com/online?u=performabuilt&m=g&t=2Click Banner for Website.
Not Just Built.....PerformaBuilt!
#3
Teching In
Thread Starter
Join Date: Jul 2009
Location: Ft. Worth, TX
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, I'm gonna change the plug wires next couple days. I hear a ticking down below, driver side, but no arcing in the dark. I also noticed a kinda hard shift 1-2, but all others are silky smooth.