do i need shorter pushrods now with milled heads?
#1
10 Second Club
Thread Starter
iTrader: (22)
Join Date: Mar 2006
Location: Northwest side of Chicago
Posts: 3,677
Likes: 0
Received 2 Likes
on
2 Posts
do i need shorter pushrods now with milled heads?
So I blew my motor and its at a machine shop for new crank rods and pistons.
I'm running 241 heads and stock block. They said they will have to mill the heads and the block to make stright. At what point would I need a shorter push rod?
I've been running stock lenght for ever.
This will have ls7 lifter and harlan sharp 1.7s non adjustable rockers.
Alex
I'm running 241 heads and stock block. They said they will have to mill the heads and the block to make stright. At what point would I need a shorter push rod?
I've been running stock lenght for ever.
This will have ls7 lifter and harlan sharp 1.7s non adjustable rockers.
Alex
#2
Teching In
iTrader: (5)
Join Date: Jan 2009
Location: Zurich, KS
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
i'd get a pushrod length checker just to be sure.
http://www.texas-speed.com/shop/item...d=913&catid=51
http://www.texas-speed.com/shop/item...d=913&catid=51