Homeless2bNY

iTrader: (2)

.

my pass front caliper is locking up after i apply brake pressure.
i just put on new pads and rotors, on it. ALL my slides are good and the piston move.

but in the P/F caliper was hard to push the pistons back and i had to crack the bleeder a little so i could get them all the way back.

i thought the brake hose to the caliper was colapsed so i replaced it and STILL same thing.

could the caliper be bad or the ABS modual is messed up?

i never saw this kinda problem so im a little stuck. I HOPE its just the caliper but i dont know anything at this point

IF ANYONE CAN HELP ME PLEASE. THANK YOU.


again if i press hard on the brakes the passenger front caliper hold the pressure and stayes locked up. when i crack the bleeder the pressure is released and wheels spins again.

Homeless2bNY

iTrader: (2)

nevermind i firgured it out...stupid caliper.

channel between the 2 pistons was pluged so only the top piston held pressure.

stupid things...i should have caught that.