Pistons Rods Problem
10-01-2009, 06:48 PM
#1
Teching In
Thread Starter
Join Date: Apr 2007
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Pistons Rods Problem Help,help.....guys, I bought an LQ4 short block for a build up and was already Taken apart. Today I went to check everything and find out that the rod were NOT numbered or marked.
What the heck am i going to do? how do i fix the problem?
Thanks a million in advance,
57 Special
What the heck am i going to do? how do i fix the problem?
Thanks a million in advance,
57 Special
10-01-2009, 06:52 PM
#2
that sucks!
the rod to cap alignment is critical, since its a cracked rod, it wont work with mix and matching rod caps. they need to be used togther, since the cap is sperated from the rod when being manufactured. each cap is unique to its rod.
gonna have to take some time to match them back up.
the rod to cap alignment is critical, since its a cracked rod, it wont work with mix and matching rod caps. they need to be used togther, since the cap is sperated from the rod when being manufactured. each cap is unique to its rod.
gonna have to take some time to match them back up.
