Finally getting the n2o dialed in. 6.76@101 (1/8 mile)
10-22-2009, 07:09 AM
#1
10 Second Club
Thread Starter
Join Date: Apr 2005
Location: Clarksville, IN
Posts: 685
Likes: 0
Received 0 Likes
on
0 Posts
Finally getting the n2o dialed in. 6.76@101 (1/8 mile) Well after a lot of trouble. I finally got a full nitrous pass in last night. First pass was a complete wash. Blew the tires off at the hit. For the 2nd pass i made some adjustments to tire pressure and front shocks and it finally hooked up and ran the 6.76@101 1.48 60' on the 100 shot jets. I raised the activation RPM to 4000 to help get it off the line so there probably some left there. I wanted to make some more passes but the track was surprisingly crowded for a Wed. test&tune and we had to be at work this morning and the kid had school.
Last edited by n2ocamaro; 10-22-2009 at 08:22 AM. Reason: Added info
10-24-2009, 07:20 AM
#4
10 Second Club
Thread Starter
Join Date: Apr 2005
Location: Clarksville, IN
Posts: 685
Likes: 0
Received 0 Likes
on
0 Posts
The temp. was dropping pretty fast after I got there. It was low 50's by the 2nd pass Which was good for power but bad for track conditions. It still spun a little on the 2nd pass but not near as bad as the first pass. Looking at the data log it is rich at the hit (10.8) until 5000 rpm then it comes up to 11.5-11.8 the rest of the run. Still have some work to do but happy to at least get a full pass.