C5 Flexplate? TQ tube upgrades?
#1
C5 Flexplate? TQ tube upgrades?
I am totally impressed by all of the quick times I see on the internet forums! Bamdimere Speedway in Denver, CO is at 5800ft! Our C5 quick time is currently 10.79 @ 130.8 mph with a 1.65/60 on Drag Radials. Getting traction is our next quest and the new M/T's just hit the door.
We just tore down the Torque Tube in the '99. Good thing too! We fabbed some new alum. to replace the rubber couplers but are concerned about the shaft and the flex plate. Is there a SFI flexplate or does anyone have a real shaft?
We are currently running an Extreme Street TripleLok converter with 4500 stall. We Dynoed at 701rwhp but are still playin with the tune.
When are you guys starting to break and what?
We just tore down the Torque Tube in the '99. Good thing too! We fabbed some new alum. to replace the rubber couplers but are concerned about the shaft and the flex plate. Is there a SFI flexplate or does anyone have a real shaft?
We are currently running an Extreme Street TripleLok converter with 4500 stall. We Dynoed at 701rwhp but are still playin with the tune.
When are you guys starting to break and what?
#2
7 Second/200 MPH Club
iTrader: (5)
Join Date: Jun 2003
Location: Fort Salonga, NY
Posts: 456
Likes: 0
Received 0 Likes
on
0 Posts
I have not had any problems with the torque tube todate the weak link is the tranny and Rear.
A SFI flexplate is going to be out real soon by ATI. Expect to see it some time next month.
A SFI flexplate is going to be out real soon by ATI. Expect to see it some time next month.