383 stroker questions
#1
Teching In
Thread Starter
iTrader: (3)
Join Date: Jan 2008
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
383 stroker questions
So currently in my LS1 I have a set of Diamond pistons (-2cc, 3.905) and Eagle H-beam rods (6.125") with a stock crank. Do I need to do anything other than buy a crank with a 4" stroke? Anything else needed?
I was gonna go 370, but I spun a few bearings and figured my crank was fried and I would need to buy a new one anyways... So I picked up an LS6 block for cheap. I thought it was as simple as just buying a new crank and slapping my pistons and rods in, but I started reading and of course, I confused myself!!
I was gonna go 370, but I spun a few bearings and figured my crank was fried and I would need to buy a new one anyways... So I picked up an LS6 block for cheap. I thought it was as simple as just buying a new crank and slapping my pistons and rods in, but I started reading and of course, I confused myself!!