I need a 4150 plate built.
#1
10 Second Club
Thread Starter
iTrader: (6)
Join Date: Mar 2007
Location: Fuquay Varina, NC
Posts: 952
Likes: 0
Received 0 Likes
on
0 Posts
I need a 4150 plate built.
I need a plate for my 4150 TB. I want it to be a diffuser style like Zex has. I just bought a NOS cross bar set-up and I can not use it in the class I will be running. What I want is a diffuser style plate that has 1 fuel and 1 nitrous inlet an the same side of the plate if that is possible. And that takes NOS jets because I have already spent a lot of money building building a nice NOS jet kit to tune my nitrous set-up with.
I would assume one of the vendors can make this. Thanks for Any help.
I would assume one of the vendors can make this. Thanks for Any help.
#2
10 Second Club
iTrader: (3)
So they can't enter the plate from opposite sides? What kind of **** is that? That's the first I've heard of that kind of rule. Hell, most classes that regulate the type of plate wouldn't allow a diffuser type of plate, and require a single crossbar typle of plate. Look at the Speedtech and see if that would work for your class. It's a diffuser plate, but IIRC, the lines do enter from opposite sides.
#4
10 Second Club
Thread Starter
iTrader: (6)
Join Date: Mar 2007
Location: Fuquay Varina, NC
Posts: 952
Likes: 0
Received 0 Likes
on
0 Posts
So they can't enter the plate from opposite sides? What kind of **** is that? That's the first I've heard of that kind of rule. Hell, most classes that regulate the type of plate wouldn't allow a diffuser type of plate, and require a single crossbar typle of plate. Look at the Speedtech and see if that would work for your class. It's a diffuser plate, but IIRC, the lines do enter from opposite sides.