can i custom make remote bleeder valve at local parts store?
#1
TECH Apprentice
Thread Starter
iTrader: (17)
Join Date: Oct 2007
Posts: 345
Likes: 0
Received 0 Likes
on
0 Posts
can i custom make remote bleeder valve at local parts store?
has anyone tried this? i dont feel like ordering a remote bleeder for my m6 swap and waiting on it to come in. can i go to autozone and round up right parts to custom make a remote bleeder? thanks!
#2
Maybe at a specialty auto parts store, but probably not the average parts chain (autozone, pep boys etc) using the conventional braided line.
Most places don't sell the braided line or have the ability to press on the proper fittings, and also don't sell the slave end adapter.
If you could find the slave end adapter locally and a bleeder valve, you could make a hardline out of brake line and position it exactly how you want it with parts-store parts.
In my case, for a cost of only $29, it was hard for me to pass up on the bleeder line that Speedway sells. They ship fast, as well.
Most places don't sell the braided line or have the ability to press on the proper fittings, and also don't sell the slave end adapter.
If you could find the slave end adapter locally and a bleeder valve, you could make a hardline out of brake line and position it exactly how you want it with parts-store parts.
In my case, for a cost of only $29, it was hard for me to pass up on the bleeder line that Speedway sells. They ship fast, as well.