NeXuS

I Tried a Search and got some different Answers but nothing that was spot on. I am pulling my engine from the Top, I dont want to disconnect the A/C lines and whatnot.. Can i just hang it up out of the way? I am removing the Radiator but leaving the condenser Any tips on where to put it so as not to interfere with pulling the engine. Also i have the TPS plate that bolts up inplace of the valley tray, Do i need to remove the heads or can i leave them on to get the engine out? Thanx!

Jon@Texas-Speed

iTrader: (18)

You can just hang it down out of the way. You just don't want to put too much strain on the lines.

Jon

99LS6SS

iTrader: (4)

I used a metal coat hanger and strapped it to the frame rail. But I pulled mine out of the bottom

SShawn

iTrader: (6)

and make sure its the rubber line flexing! You can go up or down with it.

NeXuS

Thanks! i hope to be ready to pull it this weekend. Fixing to pull the heads and un hook the tranny