KENS WS6

To be straight with everyone, im scared to run the car, with everything i done with it i think im going to break something.The history of the car is STAGE 3 HEAD AND CAM.stange 12 bolt with 430 and BMR LCA BMR adjustable arm and et streets and a ceterforce dual friction.It has a NOS dry 150 shot but i think im going to run it without.So what do you guys think she would run.with and without the spray.The car has been dynoed at 460 to the wheels without the spray.

01SS99red

iTrader: (6)

I say go for it you'll be fine just side step the clutch and I dont see y u couldnt go 11.6 or better.

Carter01

iTrader: (11)

To be straight with you, if you are scared to run it you will not get a good number. (been there so I'm not hating) Now when you drive it like it's meant to be driven it has the capacity to run high 10s on motor at 460 rwhp. For comparison sake, my car is cam only and put down 392/362 with the 10bolt and cats. I then switched to a 9 inch and no cats and never redynoed it but I went 11.7 at 118. Forgot, I dynoed it with cutout closed but ran with it open, probably helped a little.

223HAWK

iTrader: (11)

If your scared of it dont go to the track..you need to get use to the car before you go race it, spend some time just driving it normal and here and there get on it and see how it responds..