Need help with stall size - car w/driver 2750lbs
#1
Teching In
Thread Starter
iTrader: (4)
Join Date: Aug 2007
Location: SC 29069 Lamar and CA Mission Viejo 92691
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Need help with stall size - car w/driver 2750lbs
Hi everyone,
I need help with stall size. My car is very light, 2750lbs with me in it. It is street/strip driven.
LS3 416, 90mm, L92 heads 64cc 11.5:1 ,L76, 42lb.
in220 ex232, 581/595, 116 cam
4l60e
3.7:1 IRS rear end
10.5x26x15 M/T Et street
NOS..later.
I need help with stall size. My car is very light, 2750lbs with me in it. It is street/strip driven.
LS3 416, 90mm, L92 heads 64cc 11.5:1 ,L76, 42lb.
in220 ex232, 581/595, 116 cam
4l60e
3.7:1 IRS rear end
10.5x26x15 M/T Et street
NOS..later.
#2
LS1Tech Sponsor
iTrader: (3)
lscorvet,
Need to know more about your driving needs. seems to be more of a strip car but then again with a 90 mm I would need to know how much boost you want to make.
Greg
Need to know more about your driving needs. seems to be more of a strip car but then again with a 90 mm I would need to know how much boost you want to make.
Greg
__________________
FTI COMPETITION CONVERTERS AND TRANSMISSIONS
"IT'S NOT CHEATING, IT'S THE COMPETITIVE EDGE."
1-866-726-8358
info@ftiperformance.com
FTIPerformance.com
FTI Converter build sheet
FTI COMPETITION CONVERTERS AND TRANSMISSIONS
"IT'S NOT CHEATING, IT'S THE COMPETITIVE EDGE."
1-866-726-8358
info@ftiperformance.com
FTIPerformance.com
FTI Converter build sheet