MS4 pushrods
#2
TECH Enthusiast
iTrader: (12)
Join Date: Nov 2008
Location: Long Island, NY
Posts: 590
Likes: 0
Received 0 Likes
on
0 Posts
Well stock length pushrods are 7.385" so with the smaller base circle of about 1.400 versus the stock base circle of 1.550 I would guess 7.425'/7.450 would be about right but the best way is to measure since that is assuming a lot of measurements. 7.400 would be too loose.
1.550-1.400/2=75 thousandths longer + 7.385 = 7.460in
1.550-1.400/2=75 thousandths longer + 7.385 = 7.460in
Last edited by camz28arro; 10-02-2010 at 03:01 AM.