Parts inspection for my head cam project!
12-16-2010, 03:32 AM
#1
Staging Lane
Thread Starter
Join Date: Sep 2005
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
Parts inspection for my head cam project! I decided to play it safe with my H/C project and inspect all the parts that came. Everything looks good from what I can tell except for a couple issues with the oil pump and some of the head bolts, maybe I am being overly paranoid/critical but I want to make sure.
Its hard to tell in the pic but some of the head bolts aren't perfectly straight, the pic is of the one that I think is the worst(both pics are the same bolt just different positions).
For the pump, the oil exit hole and especially the pickup tube mating surface is pretty galled up.
What you guys think?
Its hard to tell in the pic but some of the head bolts aren't perfectly straight, the pic is of the one that I think is the worst(both pics are the same bolt just different positions).
For the pump, the oil exit hole and especially the pickup tube mating surface is pretty galled up.
What you guys think?
