Procomp H-beams?
01-24-2011, 07:36 PM
#1
TECH Fanatic
Thread Starter
iTrader: (2)
Join Date: Dec 2010
Location: Oklahoma
Posts: 1,084
Likes: 0
Received 0 Likes
on
0 Posts
Procomp H-beams? Has anyone heard or used the Procomp electronics H-beams? They make cranks, heads, and many other sbc stuff.
http://cgi.ebay.com/ebaymotors/ws/eB...#ht_2830wt_785
oops those are the forged I beams... anyways the question still remains.
http://cgi.ebay.com/ebaymotors/ws/eB...#ht_2830wt_785
oops those are the forged I beams... anyways the question still remains.
Last edited by nitrous2fast; 01-24-2011 at 07:42 PM.
01-24-2011, 08:47 PM
#2
Dont know **** about them.
Id see where they source them from, normally on these cheaper rods there are only a few manufactures and they ship them out and the company (scat eagle ohio) does the final machining.
A guy over on CZ28 ran some No name (literally no brand) h beams on his car and hit it with a pretty big shot of nitrous with success.
Personally Id run some scat rods. Theyve been proven.
Well nvm it depends on what you intend to through at them
Id see where they source them from, normally on these cheaper rods there are only a few manufactures and they ship them out and the company (scat eagle ohio) does the final machining.
A guy over on CZ28 ran some No name (literally no brand) h beams on his car and hit it with a pretty big shot of nitrous with success.
Personally Id run some scat rods. Theyve been proven.
Well nvm it depends on what you intend to through at them
01-24-2011, 09:38 PM
#3
TECH Regular
iTrader: (3)
Join Date: May 2010
Location: Fontana, Ca
Posts: 432
Likes: 0
Received 0 Likes
on
0 Posts
From what I hear its China junk. I herd they even make aftermarket SBC blocks as well. I've only used a distributor and roller rockers from them. The pickup in the distributor went out pretty quick repaced it with an msd one still running strong with an msd cap and rotor as well. Yes procomp copys everyone else.
